Betekenis van:
control surface

Voorbeeldzinnen

1. Surface water pollution monitoring or control services
2. Primary flight controls — control surface position and/or pilot input (pitch, roll and yaw)
3. If this condition is not met, the surface area of the control shall satisfy the requirements of paragraph 5.3.2.3 below.
4. This category covers applications used to control the movement of models (principally miniature representations of vehicles) in the air, on land or over or under the water surface.’
5. Note:1C210.a. does not control aramid ’fibrous or filamentary materials’ having 0,25 percent or more by weight of an ester based fibre surface modifier;
6. If this condition is not met, the surface area of the control shall satisfy the requirements of paragraph 5.3.2.3 below. (see Annex X, explanatory notes, paragraph 5.2.2)
7. Issues that could be considered include provision of a (manual or automatic) display brightness control, choice of display technology, choice of display surface texture and finish, choice of colour and gloss of surfaces being reflected in the display surface, choice of image polarity, siting of the display and adjustability, the use of a recess or cowl.
8. For the purposes of 8A001.b., ’operate autonomously’ means fully submerged, without snorkel, all systems working and cruising at minimum speed at which the submersible can safely control its depth dynamically by using its depth planes only, with no need for a support vessel or support base on the surface, sea-bed or shore, and containing a propulsion system for submerged or surface use.
9. For the purposes of 8A001.b., 'operate autonomously' means fully submerged, without snorkel, all systems working and cruising at minimum speed at which the submersible can safely control its depth dynamically by using its depth planes only, with no need for a support vessel or support base on the surface, sea-bed or shore, and containing a propulsion system for submerged or surface use.
10. For the purposes of 8A001.b., "operate autonomously" means fully submerged, without snorkel, all systems working and cruising at minimum speed at which the submersible can safely control its depth dynamically by using its depth planes only, with no need for a support vessel or support base on the surface, sea-bed or shore, and containing a propulsion system for submerged or surface use.
11. In the case of long vehicles (i.e. excluding cars and light vans), which have electronic control units and associated wiring harness predominantly towards the middle of the vehicle, a reference point may be established based on either the right-side surface or the left-side surface of the vehicle.
12. Issues that could be considered include provision of a (manual or automatic) display brightness control, choice of display technology, choice of display surface texture and finish, choice of colour and gloss of surfaces being reflected in the display surface, choice of image polarity, sighting of the display and adjustability, the use of a recess or cowl.
13. Arrangements using single or multiple detonators designed to nearly simultaneously initiate an explosive surface over greater than 5000 mm2 from a single firing signal with an initiation timing spread over the surface of less than 2,5 μs. Note: 3A232 does not control detonators using only primary explosives, such as lead azide.
14. the Ground Movement Surveillance endorsement (GMS), granted in addition to the Ground Movement Control endorsement or Tower Control endorsement, which shall indicate that the holder is competent to provide ground movement control with the help of aerodrome surface movement guidance systems;
15. ‘Plane of the steering control’ means in the case of the steering wheel the flat surface that splits the steering wheel rim equally between the driver and the front of the car;